Chengdu Ebyte Electronic Technology Co.,Ltd.
E180-ZG120A User Manual
Copyright ©2012–2019, Chengdu Ebyte Electronic Technology Co.,Ltd.
1
5.2.3 Data+Long address
When the output mode is data + long address, after receiving the wireless data, the serial port will output the original
data + the long address of the sending device;
5.2.4 Data+RSSI
When the output mode is data + RSSI, after the module receives the wireless data, the serial port will output the
original data + receive the RSSI value of the data packet;
5.2.5 Data+short RSSI
When the output mode is data + short a RSSI, after receiving the wireless data, the serial port will output the
original data + the short address of the sending the RSSI value of the received data packet;
5.2.6 Data+long RSSI
When the output mode is data + long a RSSI, after receiving the wireless data, the serial port will output the
original data + the long address of the sending the RSSI value of the received data packet;
Note: The maximum packet length supported by the sender for a single packet is 72 bytes.
6.Application function and instruction configuration
6.1 Function pin
6.1.1 LINK
LINK pin indicates the current network status,
after the device is successfully connected to the network, the current pin is
pulled high. When the device has no network or the parent node is lost, this pin is pulled low. The external device can
query the device network status through the pin level.
In coordinator mode,
this pin indicates whether the module is
establishing a network normally;
6.1.2 WAKE
The WAKE pin is mainly used to wake up the dormant terminal. It defaults to a high level when it is powered on.
When the pin is externally pulled down, the dormant terminal device will continue to be awakened. When the pin is
released externally, it will return to high level and enter sleep; Sleep time is determined by the duration of the external
pull down of this pin; for non-sleeping devices, this pin is meaningless;
6.1.3 AUX
The AUX pin indicates the current working status of the device. When the pin is low, the device is busy; when the
