Chengdu Ebyte Electronic Technology Co., Ltd.
E180-Z5812SP Product Manual
Copyright ©2012–2019,
Chengdu Ebyte Electronic Technology Co., Ltd.
11
5.2 Output method of received data
Received data output mode refers to the way the serial port outputs data after the module receives wireless data;
5.2.1 Transparent output
If the output mode of the configuration device is transparent output, the module will output the original data through the serial port
after receiving the wireless data;
5.2.2 Data + short address
When the output mode of the device is data + short address, after the module receives the wireless data, the serial port will output the
original data + the short address of the sending device;
5.2.3 Data + long address
When the output mode of the device is data + long address, after the module receives wireless data, the serial port will output the
original data + long address of the sending device;
Note: The terminal device can resolve the long address of the sending device such as the coordinator, router and terminal, but the
coordinator and router cannot resolve the long address of the terminal sending device
The coordinator and router here are E180-Z8910SX/P products.
5.2.4 Data+RSSI
当设备的输出模式为数据
+RSSI
，模块接收到无线数据后，串口将输出原始数据
+
接收到该数据包的
RSSI
值；
When the
output mode of the device is data + RSSI, after the module receives the wireless data, the serial port will output the original data + the
RSSI value of the received data packet;
5.2.5 Data + short a RSSI
当设备的输出模式为数据
+
短地址
+RSSI
，模块接收到无线数据后，串口将输出原始数据
+
发送设备的短地址
+
接收到该数
据包的
RSSI
值；
When the output mode of the device is data + short a RSSI, after the module receives the wireless data, the
serial port will output the original data + the short address of the sending the RSSI value of the received data packet;
5.2.6 Data + long a RSSI
When the output mode of the device is data + long a RSSI, after the module receives the wireless data, the serial port will
output the original data + the long address of the sending the RSSI value of the received data packet;
