Chengdu Ebyte Electronic Technology Co.,Ltd.
E104-BT12NSP User Manual
Copyright ©2012–2021
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
9
1.As shown in the picture,the module can only connect the VCC,GND,TX and RX to perform the communication test.
2.PWM1, PWM2, PWM3 corresponding to SIGMESH HSL model;
3.DIO1 (PA0 boot corresponding to TLSR8253) and DIO2 (PA1 boot corresponding to TLSR8253) are switch volume
input guides that customers can access to and use according to their own needs.
4.The low power module can wake up via DI01, DIO2 and serial port after going to sleep.
4. Functional Introduction
The MESH network architecture is shown below
The biggest advantage of this module is that it can relay any data in the network. Any module can be relayed and
received at the same time. The module's data signal coverage is about 50 meters. The following is a functional schematic.
A->C 70M
C->E 70M
B->D 70M
A
E
C
B
D
