Chengdu Ebyte Electronic Technology Co., Ltd.
E104-BT06 User Manual
Copyright ©2012–2018
，
Chengdu Ebyte Electronic Technology Co., Ltd
Note: In the low-power mode, the serial port output is valid and cannot be input
5.2.2 Wake-up mode
The so-called wake-up mode means that the peripherals required by the module are in a normal working state in
this mode. After the module wakes up, it outputs the status "STA: wakeup".
Wake-up method:
Wake up immediately through the falling edge of WKP pin;
5.3 Data transmission mode
5.3.1 Data transparent transmission
The so-called data transparent transmission means that the data received by the serial port is sent to the other device
through BLE without any processing, and the data received by BLE is sent out through the serial port without any
processing.
5.4 MAC address binding
The module supports MAC address binding. If the MAC address binding function is enabled. The device only
connects to devices with added MAC addresses.
5.5 Broadcast
5.5.1 General broadcast information
The broadcast information includes advertising and scan respone. Advertising is a broadcast report sent actively,
and scan respone is a broadcast report returned after receiving a host scan request.
Advertising
Fixed field
Len
Vendor field
Manufa data
020106
N
0xFF
Configurable, maximum 26 bytes
e.g
：
020106< Len >FF< Manufa data >
Users can only configure Manufa data field data.Scan response
Len
Fixed
UUID
Len
Fixed
Device name
