Chengdu Ebyte Electronic Technology Co.,Ltd.
E104-BT02 User Manual
Copyright ©2012–2019, Chengdu Ebyte Electronic Technology Co.,Ltd.
21
6.58 Set service name UUID
Instruction
Description
<SVRUUIDxxx>
The length of the configuration xxx (HEX format) is mainly specified by
"<SVRUUIDxxx >", and the UUID parameter is 2 bytes (or 16 bytes). This command
mainly configures the service name UUID and is updated on the next connection.
After the data length is out of range, return <RANGE_ERR>,When succeed return to <OK>.
6.59 Set RXUUID
Instruction
Description
<RXUUIDxxx>
The length of configuration xxx (HEX format) is mainly specified by "<RXUUIDx>", and
the UUID parameter is 2 bytes (or 16 bytes). This command mainly configures the UUID of
BLE DATA BUFF and is updated on the next
connection.
After the data length is out of range, return<RANGE_ERR>,When succeed return to <OK>.
6.60 Set TXUUID
Instruction
Description
<TXUUIDxxx>
The length of configuration xxx (HEX format) is mainly specified by "<TXUUIDxxx>", and
the UUID parameter is 2 bytes (or 16 bytes). This command mainly configures the UUID of
CENTER DATA BUFF and is updated on the next connection.
After the data length is out of range, return<RANGE_ERR>, When succeed return to <OK>.
6.61 Set MTU length
Instruction
Description
<MTUx>
Configure 1-byte (hex) data specified by x. The value of x ranges from 20 to 128.
The default is 20 bytes.
After the data length is out of range, return <RANGE_ERR>
，
When succeed return to <OK>.
If set to 20 bytes, <MTULEN14> <OK>.
6.62 Inquiry MTU length
Instruction
Description
