Chengdu Ebyte Electronic Technology Co., Ltd.
E103-W01 User Manual
Copyright ©2012–2018
Chengdu Ebyte Electronic Technology Co., Ltd.
20
6.6 Modify UART baud rate
No.
Remark
1
E103-W01 module supports 10 standard UART baud rate.
The user must not set the baud rate out of the effective range, or there will be an issue when debugging .
If so, please reload the firmware or contact us for help.
2
User can modify UART baud rate by sending AT+UART command.
For example: AT+UART=115200,8,1,0,0
3
For specific instructions, please refer to the AT command set.
Supporting baud rate
9600
19200
38400
57600
115200
230400
256000
460800
921600
Parity
NONE
EVEN
ODD
Data length
5 bits
6 bits
7 bits
8 bits
Stop bit
1 bit
2 bits
7 Specification for networking
7.1 Networking role
No.
Remark
1
E103-W01 supports AP mode (router) and STATION mode (wi-fi equipment).
At most 8 wi-fi devices can be supported when module works at AP mode.
2
E103-W01 including TCP Server
、
TCP Client and UDP as Socket.
At most 5 sockets can be connected when module works at TCP Server mode.
Based on TCP connection mechanism, if long time connection is needed, please use TCP heartbeat
packet.
