Ebyte E103-W01-IPX, Руководство пользователя

Страница: 29 / 33

Chengdu Ebyte Electronic Technology Co., Ltd.
E103-W01-IPX User Manual
Copyright ©2012–2018 ，成都亿佰特电子科技有限公司
28
9 FAQ
9.1 Communication range is too short
 The communication distance will be affected when obstacle exists;
 Data lose rate will be affected by temperature, humidity and co-channel interference;
 The ground will absorb and reflect wireless radio wave, so the performance will be poor when testing near ground;

Sea water has great ability in absorbing wireless radio wave, so performance will be poor when testing near the sea;
 The signal will be affected when the antenna is near metal object or put in a metal case;
 Power register was set incorrectly, air data rate is set as too high (the higher the air data rate, the shorter the
distance);
 The power supply low voltage under room temperature is lower than recommended value, the lower the voltage, the
lower the transmitting power;
 Due to antenna quality or poor matching between antenna and module.
9.2 Module is easy to damage
 Please check the power supply and ensure it is within the recommended range. Voltage higher than the peak will lead
to a permanent damage to the module.
 Please check the stability of power supply and ensure the voltage not to fluctuate too much.
 Please make sure anti-static measures are taken when installing and using, high frequency devices have electrostatic
susceptibility.
 Please ensure the humidity is within limited range for some parts are sensitive to humidity.
 Please avoid using modules under too high or too low temperature.
9.3 BER(Bit Error Rate) is high
 Here are co-channel signal interference nearby, please be away from interference sources or modify frequency and
channel to avoid interference;

Poor power supply may cause messy code. Make sure that the power supply is reliable;
 The extension line and feeder quality are poor or too long, so the bit error rate is high.
10 Production guidance
10.1 Reflow soldering temperature
Profile Feature
Feature
Sn-Pb Assembly Pb-Free Assembly
Solder Paste
Solder paste
Sn63/Pb37 Sn96.5/Ag3/Cu0.5
Preheat Temperature min
（
Tsmin
）
Min preheating temp.
100℃ 150℃
Preheat temperature max (Tsmax)
Max preheating temp.
150℃ 200℃