Ebyte E01-2G4M27D, Руководство пользователя

Страница: 8 / 11

Chengdu Ebyte Electronic Technology Co., Ltd. E01-2G4M27D User Manual
Copyright ©2012–2018
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
7
6. FAQ
6.1 Communication range is too short
 The communication distance will be affected when obstacle exists.
 Data lose rate will be affected by temperature, humidity and co-channel interference.
 The ground will absorb and reflect wireless radio wave, so the performance will be poor when testing near ground.
 Sea water has great ability in absorbing wireless radio wave, so performance will be poor when testing near the sea.

The signal will be affected when the antenna is near metal object or put in a metal case.
 Power register was set incorrectly, air data rate is set as too high (the higher the air data rate, the shorter the distance).
 The power supply low voltage under room temperature is lower than 2.5V, the lower the voltage, the lower the
transmitting power.
 Due to antenna quality or poor matching between antenna and module.
6.2 Module is easy to damage
 Please check the power supply source, ensure it is 2.0V~3.6V, voltage higher than 3.6V will damage the module.
 Please check the stability of power source, the voltage cannot fluctuate too much.

Please make sure antistatic measure are taken when installing and using, high frequency devices have electrostatic
susceptibility.
 Please ensure the humidity is within limited range, some parts are sensitive to humidity.
 Please avoid using modules under too high or too low temperature.
6.3 BER(Bit Error Rate) is high
 There are co-channel signal interference nearby, please be away from interference sources or modify frequency and
channel to avoid interference;
 Poor power supply may cause messy code. Make sure that the power supply is reliable.

The extension line and feeder quality are poor or too long, so the bit error rate is high;
7. Production guidance
This module is a DIP type module, the workers must work according to the static discharge operation specifications
while welding. This module is a static-sensitive product, it may cause permanent damages if the module is not welded
according to the specifications.