PX200NB
–
Manual
Page 46 / 57
device will complete the procedure of connecting to the secondary server, and if that
fails, it will attempt connecting to the primary server.
9.1.4.
Connection stability
9.1.4.1.
Mobile data watchdog
This option enables automatic reaction of the communicators after it has registered
loss of mobile transmission. Two additional fields will appear after activating this
option:
React when a transmission is lost
Here, define the period of waiting until modem reset after detecting loss of network
connection (no transmission).
Reset device
Here, define the period of waiting until device reset (not just a modem reset) after
detecting loss of network connection (no transmission).
9.2.
SMS MODE
The Text message mode may act as an autonomous data transmission channel as
well as a backup channel for GSM/LTE mobile transmission. If one SIM card has been
inserted into the GSM/LTE module, this tab will look like this:
The device will switch to SMS mode in case of problems with another connection
channels.
9.2.1.
Mobile network operator profile
9.2.1.1.
Default profile
After powering up the device with the SIM card installed, a check is made to see if
the PIN code of the card matches the PIN code defined in the device. If the PIN codes
are the same, the next step (using the IMSI code) verifies which operator the card is
from. Next, it is verified whether a server phone number has been defined for the SIM
