104
EN
EBS Ink Jet Systeme
20150330#1.0
EN
If the
Invert
check box is ticked, then where the
Rectangle
”covers” another
object in a lower layer, the common section of the rectangle and another object
is not printed.
With the
Line thickness
parameter you can set the thickness of the rectangle
outline. The parameter is disabled when the
Filled
check box is ticked.
Touch the
button in order to confirm the settings.
Shape-type Object
– Ellipse
The
Ellipse
object allows you to print any ellipse: an outline only or the entire
figure (in the latter case the
Filled
check box needs to be ticked).
If the
Invert
check box is ticked, then where the
Ellipse
”covers” another object
in a lower layer, the common section of the ellipse and that another object is not
printed.
With the
Line thickness
parameter you can set the thickness of the ellipse
outline. The parameter is disabled when the
Filled
check box is ticked.
Touch the
button in order to confirm the settings.
Line Divider
If a division mark is added to a project, you can make printouts of several text
files quickly on successive lines or on various spots on an article.
Touch the
button and then touch the
button in order to add a new,
Line divider
-type text object to a project.
