EBS HandJet 250, Руководство по эксплуатации

Страница: 29 / 34

20080908#3.0
EBS Ink-Jet Systeme EN
29
EN
39. LED indicator to indicate radio trans-
mission in the RFI Module.
As an alternative to module 22 (RFI via
USB) you can use RFI Module 35 that
communicates via RS-232.
1. Find an unoccupied series port
(COM) in your computer.
2. Connect the port COM of your com-
puter with socket 37 in module 35 via
cable 36
3. Install module 35 in such a way that
the optimal range for radio transmis-
sion is ensured.
!
Do not cover module 35 with unnec-
essary shields or objects, especially
metal ones. Ideally, place module
35
at a certain height, to avoid any
obstacles between the printer and
module
35 .
4. Insert connector 26 of power pack 25
to power socket 38 of module 35 and
connect the power pack to a wall out-
let.
5. Switch the printer on.
6. Start the control program. The pro-
gram identifies the printer and if it
communicates with the printer suc-
cessfully, the following message is
displayed:
Printer is found .
7. Click the key (the key is
available in the communication win-
dow only after the
Adv. options item
has been ticked) in order to view the
printer configuration. If an
O.K. mes-
sage is displayed, data have been
transmitted correctly.
!
If you find it difficult to communicate
with the printer, try and configure it
once again in the system. Start the
Network configuration creator from
the Guides menu and follow the
instructions.
H
28
25
35
36
29
38
COM
1
6 9
5
37
39
26
Technical Parameters
Parameter Description
Number of nozzles 16