EPX400-xC – Manual
Page 17 / 73
6.3.1.
Server parameters
In this section we define the server parameters in the monitoring station.
6.3.1.1.
Server address
This is the IP address of the monitoring system receiver (OSM.Server), e.g.
“89.123.115.8”. The address can be specified as a domain name of the server, e.g.
“module.gprs.com”.
For domain name addresses, a DNS sever address is also required.
6.3.1.2.
Server port
Specifies the server port assigned to receive data from the transmitter.
6.3.2.
APN parameters
In this section we define the APN parameters needed for GPRS connection.
6.3.2.1.
APN
In “APN” field you can enter the APN name. This parameter depends on the GSM
network provider whose services you are going to use. It specifies the name of the
access point to the GPRS network. It is possible to use a private access point. In this
case, the name of the access point will be provided by your GSM network provider.
This is usually not required with public APNs.
6.3.2.2.
User ID
In this field you can enter the user name required to connect to the GPRS network.
This is usually not required with public APNs. If you have a private APN, you should
ask your provider for this parameter.
Note: Using a private APN increases the security of the system.
Содержание EPX400-5C
Страница 20: ...EPX400 xC Manual Page 20 73...
Страница 63: ...EPX400 xC Manual Page 63 73...
