CPX200N ALARM CONTROL UNIT – INSTALLER MANUAL
20 / 106
8.
Successful adding a new user will be confirmed with 3 beeps, otherwise a constant
sound will be emitted.
4.3.
USER DELETE
You can delete a user here. Codes can be deleted by the administrator only. 3 beeps will
confirm the successfully entered function.
Note: You cannot delete Admin account (user no. 0) and Installer
account (user no. 9)
To delete a user:
1.
Enter the function code '
and press
to confirm.
2.
Enter the admin code and confirm it with
. 3 beeps will confirm the correct code
input.
3.
Numbers of already existing users will be displayed.
4.
Enter the ID code (1- 8) of a user to be deleted and press
to confirm or
to
exit without saving changes.
5.
Successful deletion of a user will be confirmed with 3 beeps, otherwise a constant sound
will be emitted.
4.4.
CHANGE OF USER CODE
The user can change its code here. 3 beeps will confirm the successfully entered function.
<User code >
<Code>
<Code>
Where:
User code -
Code of a user changing the password.
Code –
New access code (from 4 to 7 digits).
4.5.
PROGRAMMING TIME
You can change system time here. Time can be changed by the administrator only. 3 beeps
will confirm the successfully entered function.
< Administrator code >
<hh> <mm>
where:
Administrator code
– Administrator code.
hh
– Hours.
mm
– Minutes.
In any moment you can press
to exit without saving changes.
