40
Follow the procedure:
a)
With the use of OSM.Server console position cursor on proper device in
“Devices” tab (
make sure that OSM.Server has the proper device's
access
code entered!
).
b)
Click “Config.” option and then select “Set Configuration” function to display lit
of parameters.
c)
Enter server address, server port and APN. Click OK and system shall send to
device provided parameters (SMS).
d)
Wait till device addresses server (in “Devices” tab it will be marked with green
colour).
e)
Launch software and define options of device (description is provided in
chapter Programmable parameters).
f)
Select “Send” to display a new window and select remote connection (GPRS
tab). Save settings in memory of device. Saving course is displayed on special
window.
g)
After saving completion close Configuration Wizard.
h)
The device is ready to transmit data.
7.2.4.2.2.
Reprogramming of device
As the device has defined access parameters in respect of GPRS network and
OSM.Server, it is possible to program device at any time.
If device is installed in secured object and is furnished with SIM card and connected
to power supply follow the procedure:
a)
Launch configuration wizard and define options of device (description is
provided in chapter Programmable parameters).
b)
Select “Send” to display a new window and select remote connection ("GPRS"
tab). Save settings in memory of device. Saving course is displayed in special
window.
c)
After saving completion close Configuration Wizard
d)
The device is ready to transmit data according to new settings.
