EBS Ink-Jet Systems EBS-6200, Руководство пользователя

Страница: 35 / 124

EBS-6200
Printer User's Manual
Chapter 4 - Operating the Printer
#1.0
33
20091020
PARAMETER DESCRIPTION AND SETTINGS DEFAULT
Height :
1 , 2 , 3 , .... , Hmax
Hmax
The maximum height (number of pixels) of a graphics block e
Hmax , the maximum height of a printable vertical row.
quals
Expected length (number of pixels) of a graphics block.
Length :
1 , 2 , 3 , .... , 32767
height
setting
the same
as the
Front dis :
Blank space (number of vertical rows) before a graphics block.
0 , 1 , 2 , 3 , .... , 5000 0
Blank space (numbe
Back dist : 0 , 1 , 2 , 3 , .... , 5000 0
r of vertical rows) after a graphics block.
NOTE:
•
While editing a graphics block you can modify parameters of a Graphic subfile at any time (by
pressing the § key).
•
After the edition of a graphics block has been completed, empty vertical rows to the right of the
last non-blank row are deleted automatically. Therefore the block length changes and differs
from the original setting.
By pressing the
«V
keys you can move to the graphics processor , where every dot can
be inserted/erased. The image is magnified four times to make individual pixels more visible on the
display. The graphic cursor coordinates are shown in the status window on the terminal display.
The reference point for them is at the top left corner of the graphics block.
!
X: horizontal coordinate Y: vertical coordinate.
GRAPHICS PROCESSOR - A Description of Function Keys
ª To show in inversion (off/on) a point indicated by the cursor.
¨
R set the pen to the > erase < mode.
The pen status is displayed in the terminal status window.
To switch between the editor pen modes: UP / SET / CLEAR .
UP lift up the pen,
SET set the pen to the > write < mode,
CLEA
I
To invert (enable/disable) every element of a graphic subfile irrespective of the
state defined with the ¨ key. pen
¢¡£¤ cursor is mov
the subfil
To move the cursor right, left, up
ed right, beyond the len
or down according to the pen mode. If the
gth limit, new vertical rows are inserted
e length is modified. and
Y
¢¡£¤
To move the cursor by 8 dots in the direction indicated by arrow.
¥
To insert an empty vertical row and move the following rows by one row to the
right.
¦
To delete the vertical row where the cursor is and move the rows further on by
one dot to the left.
Y ¥
To insert one blank horizontal row and move the below rows by one dot down
(with no change in the subfile height).