EBS Ink-Jet Systems EBS-6200, Руководство пользователя, Страница: 13 / 124

EBS-6200
Printer User's Manual
Chapter 2 - Installing the Printer
#1.0
11
20091020
2. Installing the Printer
2.1. irements
All efforts have been put into designing this printer carefully and making it safe and reliable. However,
the safe operation of the device is conditioned by the user’s awareness of, and obedience to the
following safety rules and precautions.
The un
operatio
1.
A fire extinguisher designed to extinguish electrical equipment and flammable solvent fires
must be placed within easy reach of the unit.
2.
The unit must not be operated in rooms where an explosion hazard exists.
3.
No overprints can be m de on products whose temperature exceeds 100
°
C at the time
printing.
4.
No open fire or spark producing devices are allowed in the area where the unit operates.
5.
Power supply cord must be connected to a socket where an earthed pin is used . The
prin
inst
power has been switched off.
7.
ons, animals or accidental objects
8.
Pro o be worn by persons performing any
9.
should be used to do the washing as they collect static electricity. Metal
10.
the outside of the building through
11.
No ink, solvent or wash-up (or waste fluid remaining after the head has been washed) should
be left in open vessels as these inflammable fluids may ignite from accidental sources of fire.
WARNING:
Static electricity collected by people (on their plastic clothes or in their hair, for example) may spark-
over to ink or wash-up vessels when they are left open.
The ink and wash-up are inflammable
and may ignite! Therefore, before you approach the open vessels containing inflammable fluids,
discharge static electricity by touching the metal printer housing or another metal object that is
connected to earth.
Safety Requ
it should be operated by the staff that has been trained. It is recommended that the
n of the printer is supervised.
!
a of
efficiency of earth should comply with the applicable standards. Additionally, in some cases the
ter-housing earth terminal needs to be connected appropriately (according to the
ructions given in section
2.3.4 Connections
).
6.
As high voltage occurs in the printer, make sure that all manipulations in the electrical part
of the system and inside the head are performed after
The outlet of the head must not be directed towards pers
during printing in order to avoid splashing anybody or anything with ink
.
tective clothes and possibly protective glasses need t
work on the ink system.
No plastic vessels
vessels are recommended.
Air contaminated with solvent should be carried away to
a clear duct.
In case of accident …
´
When ink or solvent spills occur, the spilled fluid should be wiped with a piece of absorbent
material and then disposed of in compliance with fire, health and safety at work regulations.
´
If the clothing has been splashed, remove it as soon as possible.
´
Should the eyes or skin get irritated:
EYES need to be rinsed with running water for at least 15 minutes, then you should see your
eye doctor,
SKIN needs to be washed with water and soap.
!
!