EBRO ARMATUREN SBU IO-Link, Быстрое руководство

Страница: 3 / 10

Quick Guide - SBU IO-Link
Page 3 of 10
A) General information
A01 Information about these Quick Guide
These Quick Guide provide important information on handling the SBU IO-Link and assist with the fast commissioning
of the SBU IO-Link.
All information in these operating instructions are based on the information on the properties of the product described
here and the corresponding safety regulations available at the time of going to press.
The manufacturer reserves the right to make changes and modifications within the scope of the legal regulations and
in the interests of improving the properties of the product.
These Quick Guide are intended as a package leaflet for the purchased product SBU IO-Link and are not a
replacement for the original assembly instructions. The original assembly instructions can be downloaded from our
website
www.ebro-armaturen.com . These original assembly instructions as well as all other information necessary for
safe use must be available to all persons who use the SBU IO-Link at the time of mounting/dismounting and during
operation. The SBU IO-Link may neither be mounted nor used without these short operating instructions and the
original assembly instructions having been read and understood and being ready to hand at the place of use.
A02 Explanation of symbols
Information is marked in these instructions by symbols:
xxxxx
Danger / Caution / Warning
… indicates a dangerous situation that can lead to the death of, or serious injuries to
persons and/or damage to the piping system.
Note
… indicates an instruction that must be observed without fail.
Information
… provides useful hints and recommendations
If these information, caution and warning notes are not heeded, this can lead to dangerous situations and render the
manufacturer's warranty void.