ebm-papst VTD-60 K5SB Series, Перевод оригинальной инструкции по эксплуатации

Страница: 33 / 37

33/37
Item no.: HAB 100177146 - 000 · EN · Change· Release 2020-10-26
Control electronics Control electronics
VTD-60.XX-K5SB
VTD-60.XX-K5SB
Operation
6 Operation
6.1 Switching on the control electronics
Use the higher-level control system to provide the power supply. Switch on the control electronics by activating the enable input.
6.2 Setting operating modes
There are various operating modes to choose from. You can set the operating modes using parameters. You can find a detailed
description of the individual parameters in the help file for the software "epTools".
6.3 Checking functions
The LED on the control electronics provides information about the current operating status, see Chapter “3.4 Status LED” on
page 13 .
6.4 Switching off the control electronics
"Take away" approval of the enabler to switch off the control electronics. Use the higher-level control system to switch off the
power supply.
6.5 Parameterization/description of parameters
Use the "epTools" software to carry out the parameterization. You can find further information and a detailed parameter descrip-
tion in the software's help file.
You will need the USB interface adapter to carry out the commissioning and parameterization (see Chapter
“8.1 Accessories
available to order” on page 36)