background image

7

TROUBLESHOOTING (continued)

CARE & HANDLING

•   Do not submerge in water or other liquids.
•   Do not disassemble the product for any reason.
•   Do not expose to extreme temperatures.
•   Do not drop, throw, smash or otherwise cause physical shock.
•   Clean using only a slightly damp cloth.
•   Do not use cleaners with chemical agents. 
•   Do not short-circuit the battery terminals.

        CAUTION – Battery Safety Information

•   Non-rechargeable batteries are not to be recharged
•   The pre-installed battery is non-replaceable
•   Rechargeable batteries should only be recharged under adult supervision
•   Do not mix alkaline, standard (carbon-zinc), or rechargeable 
 (nickel-cadmium) 

batteries

•   Exhausted batteries are to be removed
•   Do not mix old and new batteries
•   Do not dispose of product in fi re; batteries may explode or leak
•   If this product will not be used for an extended period, remove the 
  batteries from the product
•   The supply terminals are not to be short-circuited
•   Batteries are to be inserted with correct polarity
•   Clean the battery contacts and also those of the product prior to 
 battery 

installation

•   As always, dispose of batteries in an eco-friendly manner

Set the ON/OFF Switch to the ON 
position.  

Recharge the helicopter battery. 
If this does not work, replace 
the batteries in the remote and 
recharge off  fresh batteries.   

Problem

Cause

Correction

Drops in 
midfl ight 
or performs 
poorly

Weak battery 
power

Recharge the helicopter battery. 
If this does not work, replace 
the batteries in the remote and 
recharge off  fresh batteries. 

Propellers are not 
moving 

Helicopter is 
powered off 

Weak battery 
power

XC9977IS01EXC.indd   7

XC9977IS01EXC.indd   7

8/24/11   2:43 PM

8/24/11   2:43 PM

Содержание Phantom Eagle XC9977









Отзывы: