EAW UMX.96 Скачать руководство пользователя страница 159

Страница: 159 / 208

EAW UMX.96 Owner’s Manual

Touchscreen Interface

12-79

The function buttons are described in detail:

•

Up Arrow:

Moves the selected user bank channel up a position, effectively swapping it with the one

above it.

•

Down Arrow:

Moves the selected user bank channel down a position, effectively swapping it with the one

below it.

•

Replace:

Sets the selected source channel into the selected user bank destination channel position re-

placing any previously assigned channel in that position.

•

Insert:

Inserts the selected source channel into the selected user bank destination channel position. This

shifts all following assigned channels down. Whatever was assigned to channel 24 goes away. It does not

matter if there were unassigned channels between channel 24 and the last assigned channel.

•

Clear:

Clears the current user bank destination channel position, assigning it to None.

Note:

After pressing either the

Replace

and

Insert

buttons, the selected source channel and destination

position will both move to the next location. This allows you to quickly create user banks with a minimum

number of button presses.

12.8.2.1 User Banks Tab Edit Menu

The user bank tab’s

Edit

menu has the following commands:

•

Save User Bank Preset As

— Saves the current user bank assignments as a preset under a user-defined

name.

•

Load User Bank Preset

— Loads a previously saved user bank assignment preset.

•

Reset User Bank

— Restores the user bank screen to its default configuration.

NYI

Содержание UMX.96

















































































































































































































Результаты поиска

Содержание UMX.96

Отзывы:

Похожие инструкции для UMX.96

Бренды по названию

Популярные бренды

EAW UMX.96, Руководство пользователя

Результаты поиска

Содержание UMX.96

Отзывы:

Похожие инструкции для UMX.96

Бренды по названию

Популярные бренды