SPECIFICATIONS KF760
DESCRIPTION
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
KF760/0002962/2 pp
April 2002
Printed in USA
PERFORMANCE
The KF760 is part of the KF760 Line Array Series. The KF760
Series uses advanced divergence shading where all loud-
speakers are powered at equal level. A full KF760/KF761 array
can provide uniform sound coverage from directly beneath
itself out to hundreds of feet without complex signal pro-
cessing. Vertical coverage for the array is set by varying the
splay of the rear of the enclosures, leaving the fronts tight-
packed. This configuration produces a continuous, coherent
wavefront from the array, projecting extended range, high-
resolution sound over its full coverage area.
Quality construction features include, Baltic birch plywood
enclosures, heavy-duty steel grilles, Neutrik NL8 connectors,
heavy duty bar handles, rear hand-holds, and accessory cast-
er pallets. Six Year Warranty.
This high output touring system is scalable from theaters
under 1,000 seats to stadiums. The KF760 is used as the short
to long throw element of a KF760 Series line array providing
coverage in the range of 70 to 400 feet. The KF761 supple-
ments the KF760s to provide near-field coverage for distances
less than 70 feet. The recommended minimum KF760/KF761
array size is four enclosures. For full performance eight enclo-
sures are recommended. To extend the low frequency
response, KF940 SuperSubs™ make an ideal complement to
the KF760 Series.
Applications include:
Arenas Convention Centers Large Ballrooms
Stadiums Theaters
Music Pavilions
Auditoriums Outdoor Events
Frequency Response (Hz)
±3 dB (1) Enclosure Array
80 Hz to 16 kHz
±3 dB (8) Enclosure Array
40 Hz to 16 kHz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
LF Single Enclosure
96
MF Single Enclosure
108
HF Single Enclosure
113
LF (8) Enclosure Array
106
MF (8) Enclosure Array
125
HF (8) Enclosure Array
117
Impedance (Ohms)
LF
2x 8
MF
8 (2@ 16 Ohm each)
HF
8 (2@ 16 Ohm each)
APPLICATION
PHYSICAL
Power Handling (Watts Continuous)
LF 2000
MF
800
HF
300
Recommended High-Pass Frequency
24dB/Octave
40 Hz
Calculated Maximum Output (dB SPL @ 1m)
Single Enclosure
LF Peak/Long Term
135/129
MF Peak/Long Term
142/136
HF Peak/Long Term
144/138
Eight (8) Enclosure Array
LF Peak/Long Term
154/148
MF Peak/Long Term
169/163
HF Peak/Long Term
156/150
Nominal Coverage Angle
-6 dB points (degrees)
Horizontal
80
Maximum Vertical Splay
3
Product Group
S
System Configuration
3-way, full range
Powering
Tri-amplified
LF Subsystem
2x 12-in woofers, horn-loaded
MF Subsystem
2x 10-in cone, Radial Phase
Plug™, horn-loaded
HF Subsystem
2x 2-in exit/3-in voice coil
compression driver, horn-loaded
Enclosure (shape)
Horizontal trapezoid
Enclosure Materials
Exterior grade Baltic birch ply-
wood, urethane
Finish
Wear-resistant black textured
paint
Connectors
2x Neutrik NL8
Suspension Hardware
Proprietary EAW rigging system
Grille
Powder coated perforated steel
