• Ideal size and performance for rigorous all-purpose use
• Wave Guide Plate™ optimizes HF pattern for near field
applications
• HF compression driver and vented LF for fully professional
performance
• Asymmetric enclosure provides multiple mounting angles
• Pole mount cup & fly track, plus Omnimount®
Series 300 or similar mounting points
• Passive or bi-amplified operating modes
The JFX200 is a 2-way multi-purpose loudspeaker. Its multi-
functional design adds considerably to its value as a full-
range loudspeaker. Combining high output and natural repro-
duction, it is specifically outfitted to serve in a variety of
both portable and permanent applications. The asymmetric
enclosure provides typical angles needed for ceiling and wall
mounting as well as for stage monitor operation. For perma-
nent installation, enclosure hardware includes mounting
points for an Omnimount® Series 300 or similar bracket and
fly track for suspension. Provisions for portable use include a
pole mount cup, top/bottom fly track for rigging, and handles
integral to the enclosure that facilitate handling and trans-
port. The JFX200 is particularly suitable as a nearer field main
loudspeaker or as a fill/delay element in larger systems. Its
wide angle projection makes audience coverage easy in a vari-
ety of situations. While the JFX200 is well suited as is for
many applications, the addition of a subwoofer expands its
capabilities for more demanding applications such as for hous-
es of worship, theaters, and band PA. Six year warranty.
• Portable systems or permanent installations
• Wall and ceiling mountings
• Ideal size and output for wide range of
program material
• Main PA reinforcement in medium-sized spaces
• Downfill for flown clusters
• High SPL under balcony / stage lip / delay fill
• A/V and/or surround sound installations
• Voice & F/X reinforcement in themed attractions
SPECIFICATIONS JFX200
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
JFX200/0004639/2 pp
September 2002
Printed in USA
Part Number
0002816
System Configuration
2-way, full-range
Powering Switchable:
Passive
(LF/HF
crossover) or bi-amplified
LF Subsystem 1x 12-in, vented
HF Subsystem
1x 1.4-in exit/3-in voice coil
neodymium compression driver
on Wave Guide Plate™
Controls (switches, knobs)
Powering mode switch
Recommended High-Pass
Frequency (24 dB/octave)
60 Hz
Enclosure Materials
Exterior grade Baltic birch plywood
Finish
Wear resistant textured black paint
Connectors
2x Neutrik NL4 Speakon
Hardware
Pole mount cup (bottom); 2x 3-
position fly track (bottom); 1x
11-position fly track (top); 4x
5/16”-18 mounting points for
Omnimount Series 300 (rear)
Grille
Powder coated perforated steel,
foam backed
Frequency Response (1 W @ 1 m)
±3 dB
90 Hz to 16 kHz
-10 dB
60 Hz
Axial Sensitivity (dB SPL, 1 W @ 1 m)
Full Range
97
LF
97
HF
104
Impedance (Ohms)
Full Range 8
LF
8
HF
8
Power Handling (Watts, continuous)
Full Range
500
LF
500
HF
200
Calculated Maximum Output (dB SPL @ 1 m)
Full Range Peak
130
LF/HF Peak
130/133
Full Range Long Term
124
LF/HF Long Term
124/127
Nominal Coverage Angle / -6 dB points (degrees)
Conical
90
FEATURES
DESCRIPTION
APPLICATION
PERFORMANCE
PHYSICAL
