SPECIFICATIONS AS660e
DESCRIPTION
APPLICATION
PERFORMANCE
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
AS660e/2 pp
October 2001
Printed in USA
A bi-amplified (passive mid/high crossover) or tri-amplified
3-way full range system in a trapezoidal enclosure. Includes
2x 12-in woofers (separated vertically), a horn-loaded 10-in
MF cone with Radial Phase Plug™ and a 1.4-in exit/2.5-in
voice coil HF neodymium compression driver on a 60° x 45°
constant directivity horn.
The AS660e is engineered for use in permanent installations.
Optimized subsections provide excellent full range frequency
response in a medium format enclosure. Includes comprehen-
sive 3/8"-16 mounting/suspension points. Six year warranty.
Applications include
Stadiums
Arenas
Performing Arts Centers
Houses of Worship
Frequency Response (Hz)
±3 dB
67 Hz to 15 kHz
-10 dB
50 Hz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
Passive MF/HF
107
LF
102
MF
109
HF
109
Impedance (Ohms)
Passive MF/HF
8
LF
4
MF
8
HF
8
Power Handling (Watts, Continuous)
Passive MF/HF
450
LF 800
MF
400
HF
125
Recommended High-Pass Frequency
24 dB/Octave
40 Hz
Calculated Maximum Output (dB SPL @ 1m)
Passive MF/HF Peak
139
LF Peak
137
MF Peak
141
HF Peak
136
Passive MF/HF Long term
133
LF Long Term
131
MF Long Term
135
HF Long Term
130
Nominal Coverage Angle/-6 dB points (degrees)
Horizontal
60
Vertical
45
Product Group
I
System Configuration
3-way, full range
Powering Configuration(s)
Bi-amplified (passive MF/HF
crossover) or tri-amplified
LF Subsystem & Loading
2x 12-in, vented
MF Subsystem & Loading
1x 10-in cone, Radial Phase
Plug™/ horn-loaded
HF Subsystem & Loading
1x 1.4-in exit/2.5-in voice
coil neodymium compression
driver on constant directivity horn
Cabinet Type (shape)
Trapezoidal
Enclosure Materials
Exterior grade Baltic birch
plywood
Finish
Wear-resistant textured black
paint
Connectors
2x 6-Contact terminal barrier
strip, jumpers used for powering
configuration
Suspension Hardware
(18) 3/8"-16 threaded mounting/
suspension points (4 each on
top, bottom and sides, 2 on back)
Grille
Powder coated perforated steel
PHYSICAL
