Eaton XV-112, Руководство по эксплуатации

Страница: 41 / 56

6 Operation
6.4 Inserting and removing an SD card
MICRO PANEL XV-112 11/2011 MN04802005Z-EN www.eaton.com
41
6.4 Inserting and removing an SD card
Inserting the SD card
1
Push the SD card into the SD slot (A) until it snaps into position.
Removing the SD card
1
Push the SD card in the SD slot (A) all the way in.

This releases the lock mechanism and the SD card comes out of the SD slot a little.
2 Remove the SD card from the SD slot.
Fig. 19 SD slot (A)
CAUTION
Data loss
During a write operation, the SD card may lose data or may be destroyed if it is re-
moved or if there is a power failure.

Only insert the SD card when the device is in a de-energized state.

Avoid write operations to SD cards. Reasons:
-
The number of write cycles possible on SD cards is limited.
-
A power failure during write operations will most likely lead to loss of data.

Only remove the SD card when the device is in a de-energized state.

Before switching off, ensure that no software write operations to the SD card are
in progress.

Do not apply any force (SD cards are protected against reverse insertion).