Eaton XV-112, Руководство по эксплуатации

Страница: 28 / 56

5 Installation
5.3 Interfaces
28
MICRO PANEL XV-112 11/2011 MN04802005Z-EN www.eaton.com
5.3.5 Ethernet
Tab. 9 Control LEDs of the Ethernet interface
Cable

Use shielded twisted pair cable (STP) for networking:

For device to device connection: crossover cable

For connecting to the hub/switch: 1:1 patch cable

Maximum cable length: 100 m.
Fig. 10 Ethernet interface (RJ45 socket)
LED Signal Meaning
ACT (yellow) flashes Ethernet is active (data traffic)
LINK (green) lit Active network is connected and detected
ACT LINK
CAUTION
Forces acting on the Ethernet interface
Communication can be disturbed and the connection mechanics damaged if the
Ethernet interface is exposed to severe vibration or the RJ45 plug connection is
pulled.

Protect the RJ45 connection from severe vibration.

Protect the RJ45 connection from pulling on the socket.