Eaton XV-102 Series, Руководство по эксплуатации

Страница: 37 / 79

5 Installation
5.3 Interfaces
HMI/PLC XV-102 08/2016 MN04802004Z-EN www.eaton.com
37
5.3.8 SmartWire-DT Master
The SmartWire-DT Master interface is not galvanically isolated.
5.3.8.1 Additional documentation for devices with SmartWire-DT Master interface
In addition to this document, the following documents are required to build a SmartWire-DT network, to
install the network at the SmartWire-DT Master interface and to operate the network:

MN05006002Z SmartWire-DT The System Manual
(System description, engineering, installation, commissioning, and diagnostics for a SmartWire-DT
network)

MN05006001Z SmartWire-DT Module Manual IP20
(surface mounting, engineering, installation, etc. for the individual SmartWire-DT modules)

MN120006 SmartWire-DT Module Manual IP67
(surface mounting, engineering, installation, etc. of the single SmartWire-DT slaves,
I/O modules IP67)

MN04802091Z User Manual XSoft-CODESYS: PLC programming XV100
(Use of the PLC programming tool XSoft-CoDeSys-2 and the PLC runtime system for the XV100
device type with Windows CE)
The documents can be downloaded from:

www.eaton.eu/doc (search for the document number using the search field on the home page)

www.eaton.com (search for the document number using the search field on the home page)

www.eaton.eu/swd
CAUTION
Not galvanically isolated SmartWire-DT system
The device may be damaged by potential differences.

Provide a common star point for the earth wiring.