Eaton XP-702 Series Скачать руководство пользователя

Страница: 18 / 86

3 Safety regulations

3.2 Meaning of symbols

MICRO PANEL XP-702

07/2011 MN04802003Z-EN

www.eaton.com

3.2

Meaning of symbols

The following symbols are used in this document according to the hazard level described:

The danger symbol used and the text indicate the actual danger and the related preventative measures.

DANGER

Signal word DANGER

Indicates an imminently hazardous situation which, if not avoided, will result in death
or serious injury.

WARNING

Signal word WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injury.

CAUTION

Signal word CAUTION

Indicates a potentially hazardous situation which, if not avoided, could result in minor
or moderate injury.

CAUTION

Signal word CAUTION without safety alert symbol

Indicates a situation which, if not avoided, could result in material damage.



Indicates useful information.

www.comoso.com

Содержание XP-702 Series























































































Результаты поиска

Содержание XP-702 Series

Отзывы:

Похожие инструкции для XP-702 Series

Бренды по названию

Популярные бренды

Eaton XP-702 Series, Руководство по эксплуатации

Результаты поиска

Содержание XP-702 Series

Отзывы:

Похожие инструкции для XP-702 Series

Бренды по названию

Популярные бренды