Eaton XNE-GWBR-2ETH-MB, Руководство пользователя, Страница: 78 / 200

5 Implementation of Modbus TCP
5.9 Parameters of the modules
78
XI/ON: XNE-GWBR-2ETH-MB 10/2011 MN05002008Z-EN www.eaton.com
12 0 Substitute value DO 0
A
1
1 Diagnostic DO1 0 = on
A
1 = off
2/ 3 Function DO1 00 = output
A
01 = on when cnt value >= ref. value
10 = on when cnt value <= ref. value
11 = pulse when cnt val. = ref. value
5/ 6 Function DO2 00 = output
A
01 = on when cnt value >= ref. value
10 = on when cnt value <= ref. value
11 = pulse when cnt val. = ref. value
13 0/ 1 Signal evaluation (A,B) 00 = pulse and direction
A
01 = rotary sensor: single
10 = rotary sensor: double
11 = rotary sensor: fourfold
2 Sensor/ input filter (A) 0 = 2.5 μ s (200 kHz)
A
1 = 25 μ s (20 kHz)
3 Sensor/ input filter (B) 0 = 2.5 μ s (200 kHz)
A
1 = 25 μ s (20 kHz)
4 Sensor/ input filter (DI) 0 = 2.5 μ s (200 kHz)
A
1 = 25 μ s (20 kHz)
5 Sensor (A) 0 = normal
A
1 = inverted
7 Direction input (B) 0 = normal
A
1 = inverted
14 0 Group diagnostics 0 = release
A
1 = block
4/ 5 Behavior CPU/master STOP – 00 = switch off DO1
A
– 01 = proceed with operating mode
– 10 = DO1 switch to substitute value
– 11 = DO1 hold last value
Table 29:
Module
parameters Byte Bit Parameter name Value