Eaton XH-303, Руководство пользователя

Страница: 25 / 94

2. Safety regulations
2.3 Device-specific hazards
2.3 Device-specific hazards
CAUTION
DESTRUCTION
The XH-303 should only be opened by the manufacturer or by an
authorized center. Operate the XH-303 until only with the enclosure
fully closed and sealed.
CAUTION
ELECTROSTATIC DISCHARGE
Do not touch components (e.g., connector pins) that are elec-
trostatic-sensitive.
Discharge any static electricity from your body before touching
the XH-303 (e.g., by touching an earthed metal object).
Electrostatic discharges may damage or ruin assembly parts.
Because of this, it is necessary to take precautions whenever hand-
ling the cards.
Please refer to the guidelines for electrostatic-sensitive components
for more information (ESD guidelines).
CAUTION
INTERFERENCES
The values specified in the technical data, as well as the device's
electromagnetic compatibility (EMC), cannot be guaranteed if the fol-
lowing are used: unsuitable cables, improperly assembled and ter-
minated cables and/or wiring that does not conform to the applicable
standards.
Only use cables assembled and terminated by professionals.
The cables being used must be assembled and terminated as
required by the port/interface description in this document.
When wiring the XH-303 Web Panel, follow all instructions regarding
how to wire the corresponding port/interface.
All general Directives and standards must be complied with.
CAUTION
INTERFERENCES
Screw all plug-in connections or lock them into place in order to
improve screening.
Signal cables must not be routed in the same cable duct with power
cables.
Before putting the system into operation, check all cable connections
25
XH-303 09/22 MN048029EN Eaton.com