Eaton xChargeIn, Руководство пользователя

Страница: 11 / 28

xChargeIn Display
Manual for MID variants V1.01
11
© EATON
3 Display
3.1 Display
The MID variants have an LED dot matrix display. For the calibration validity
of the charging station, a correct display and sufficient readability are re-
quired.
Fig. 3-3: Display
The display may show different information depending on the operating sta-
tus (e.g., software version, IP address, authorization request). The main
task, however, is to display the status of the internal energy meter. During
periods of inactivity, the display brightness is reduced and switched off after
a few minutes.
The preceding "MI" indicates a notice relevant to calibration law. All other in-
dications on the display are informative.
The display lights up through the housing and is only visible when the power
supply is active. For further details about the information on the display, see
"Operating Instructions".