Eaton XC-152 Series, Руководство пользователя, Страница: 21 / 86

2 Safety regulations
2.1 Basics
Compact PLC XC-152 05/17 MN050001ZU EN www.eaton.com
17
2 Safety regulations
2.1 Basics
The device has been designed according to the state of the art and all gener-
ally accepted safety rules and standards. However, this alone cannot elimi-
nate all potential hazards, which is why it is necessary for you to be aware of
all hazards and residual risks.
Do not run the device unless it is in perfect technical condition. Make sure to
always operate it as specified in this document and for the intended purpose.
2.2 Mandatory requirements, personnel requirements
2.2.1 Occupational safety
All generally accepted occupational health and safety rules and standards
(internal and national) must be complied with, as must be all applicable laws
and regulations in the relevant country.

WARNING
The XC-152 must be used only in locations for which the XC-152
is approved. Make sure to read and follow the information and
labels on the nameplate, as well as section Approvals and decla-
rations in the appendix.

WARNING
It is strictly prohibited to use the device in order to implement
safety-relevant functions (in the sense of personal and machine
protection).
NOTICE
Follow the safety instructions for the XC-152!
The section on safety instructions must be read and understood
by everyone who will be working with the Compact Controller
before the actual work is performed.
NOTICE
Pay attention to the hazard severity levels used throughout this
documentation whenever a hazard is indicated. The hazard sym-
bol and signal word used and the corresponding text will provide
information regarding the specific hazard and how to avoid or
prevent it.