Eaton XC-152 Series, Руководство пользователя, Страница: 17 / 86

1 Description
1.6 Service side
Compact PLC XC-152 05/17 MN050001ZU EN www.eaton.com
13
1.6 Service side
The device features the following controls on the service side:
Figure 2: Operator Controls on service side
Element Function
E MEM CARD-Slot Memory card (SD card) slot
F CTRL button Used to force the device to start with the DHCP function:

If the CTRL button is held down while the device is being powered up (until the
SF LED lights up green), the device will obtain an IP address via DHCP. If the
CTRL button is then held down for 5 seconds (until the SF LED flashes green),
the device will be assigned IP address 192.168.1.1 temporarily. In this mode,
the Autoexec.bat, Autoexec.reg, and Autoexec.bmp files will not be executed.
If the operating system on the memory card is invalid or is not found there to
begin with (COM LED flashing red or orange), the CTRL button can be pressed
in order to boot up with the internal operating system.
E
F