manualshive.com logo in svg

Eaton WaveLinx, Руководство пользователя и программирования, Страница: 125 / 141

Поделиться
Скачать
Eaton WaveLinx Скачать руководство пользователя страница 125

125

 

 

WaveLinx User Manual

www.eaton.com/wavelinx

Updating the Mobile Application

From time to time, updates may be available for the WaveLinx Mobile Application. Updates will be performed per the user’s preference 

settings on each mobile device. If not updated automatically, updates may be installed manually from the updates section of the App Store 

or Google Play Store.

Replacing and Syncing End Devices using the Mobile Application

If a WaveLinx device is replaced in the system, the mobile application may be used to synch the previous device’s settings to the new 

device.

To perform the device synch:

Step 1: Install the replacement device per the device’s installation instructions.

Step 2: Open the WaveLinx Mobile Application and establish a connection with the Wireless Area Controller as the administrator user.

Step 3: From the WaveLinx Mobile Application, select the menu icon. Tap on the option to enable pairing and then tap on the OK button to 

proceed.

Tap OK

Tap on discover 
new devices

Select the menu 
icon

Содержание WaveLinx














































































































































Отзывы:

Нет отзывов