Eaton UltraShift PLUS EO-11E406B-PV, Руководство по установке, Страница: 18 / 100

12
Clutch Interface
Clutch Interface
Pilot Bearing Specifications
The OEM is responsible for the design and selection of pilot bearings to mate with our product. Eaton recommends high quality
pilot bearings procured from Original Equipment Manufacturers. Significant decrease in life may occur with the use of generic
brand pilot bearings.
The following pilot bearings are currently the minimum Eaton Clutch Division recommends. The operating temperature that the
pilot bearing sees has increased in the last several years. This creates operating conditions that are no longer acceptable to the
standard pilot bearings and grease. In addition, the life of the clutch has increased. The use of high temperature grease and Viton
seals are now mandatory to ensure adequate bearing life. Pilot bearing failure usually results in a warranty claim for drag or
clutch noise. This results in a claim against Eaton Clutch.
Below is a list of the recommended Pilot Bearings. All of these bearings have Viton seals and a high temperature grease in
addition to a C3 fit. It is acceptable to use synthetic high temperature grease and a C5 fit if desired.
If the supplier specific bearing is no longer available, contact the supplier for an equivalent alternative bearing.
Vendor Seal Type Bearing Series 6205 Bearing Series 6206 Bearing Series 6306 Bearing Series 6006
NTN Viton 6205 LLUA1/C3 6206 LLUA1 6306 LLUA1/C3 6006 LLUA1 C3/LX16
KOYO Viton 6205 2RKF-S2/C3 6206 2RU 6306 2RKF-S2/C3 -
NSK Viton 6205 DDU7/C4 ENS 6206 2RS2 6306 DDU7/C4 ENS 6006 DDWA18A C4/ENSS
SKF Viton 6205 2RS2/C3 6206 2RSJ 6306 2RS2/C3 -
FED-MOG Viton 6205 VV/C3 206 VV 6306 VV/C3 -
PEER Viton 6205-2VRLD-C3 - 6306-2VRLD-C3 6006-2VRLD-C3