Effective May 2018
Supersedes 91647
Instruction Sheet
IL211025 EN
TechBench Full Shelf
Figure 2.
1
91649
Linear TechBench™ Full Shelf
Rev. __ Date:
TOOLS REQUIRED
(1) Phillips screwdriver (not supplied)
(1) Plastic mallet (not supplied)
Figure 1
1. Determine the location for the Full Shelf and attach the
Brackets to the TechBench™ as shown in figure 1.
NOTE
: Be sure that the Brackets are at the same
level.
Tap the top of each Bracket with a plastic mallet to
ensure that the hooks are fully seated.
2. Lock each Bracket in place using two #10-24 x 3/8”
pancake phillips head screws (provided). See figure 2.
Figure 2
Right Hand Bracket
Hooks
Slots
#10-24 x 3/8” phillips
head screws
1
91649
Linear TechBench™ Full Shelf
Rev. __ Date:
TOOLS REQUIRED
(1) Phillips screwdriver (not supplied)
(1) Plastic mallet (not supplied)
Figure 1
1. Determine the location for the Full Shelf and attach the
Brackets to the TechBench™ as shown in figure 1.
NOTE
: Be sure that the Brackets are at the same
level.
Tap the top of each Bracket with a plastic mallet to
ensure that the hooks are fully seated.
2. Lock each Bracket in place using two #10-24 x 3/8”
pancake phillips head screws (provided). See figure 2.
Figure 2
Right Hand Bracket
Hooks
Slots
#10-24 x 3/8” phillips
head screws
Figure 1.
Linear TechBench
™
Full Shelf
Tools Required
•
(1) Phillips screwdriver (not supplied)
•
(1) Plastic mallet (not supplied
1. Determine the location for the Full Shelf and attach
the Brackets to the TechBench
™
as shown in figure 1.
NOTE:
Be sure that the Brackets are at the same
level.
Tap the top of each Bracket with a plastic mallet to
ensure that the hooks are fully seated.
2. Lock each Bracket in place using two #10-24 x
3
⁄8"
pancake phillips head screws (provided).
See figure 2.