Eaton SM65 Скачать руководство пользователя страница 14

Страница: 14 / 73

SM65 Supervisory Module Handbook

IPN 997-00012-35E December 2009

Keypad and Display

Rack Mount Version

Panel Mount Version

Backlit LCD Display

Keypad

Power On LED (green) – indicates that the SM65 is powered

Non-urgent Alarm LED (yellow) – indicates one or more active Non-urgent alarms

Urgent/Critical Alarm LED (red) – indicates one or more active Urgent/Critical alarms

Scroll:

Press to scroll through lists and menus and to increase or decrease

configuration file values.

Information:

Press to view status messages and a list of active alarms in Status View

Mode.

Enter:

Press to go to Configuration Mode and Edit Mode, save configuration file

changes, clear alarms or toggle relay states.

Escape:

Press to go to Main Display Mode or cancel configuration file changes.

Display indicators

Urgent/Critical alarm.

Non-urgent alarm.

AAA

The system value cannot be displayed, because of a failed, disconnected or
unconfigured sensor.

>?@

Press a scroll key to view further display items.

Содержание SM65




































































Результаты поиска

Содержание SM65

Отзывы:

Похожие инструкции для SM65

Бренды по названию

Популярные бренды

Eaton SM65, Руководство пользователя

Результаты поиска

Содержание SM65

Отзывы:

Похожие инструкции для SM65

Бренды по названию

Популярные бренды