Eaton Rapid Link RAMO5, Руководство пользователя

Страница: 65 / 218

2 Engineering
2.10 Actuator output
Rapid Link 5 · RAMO5 · RASP5 10/19 MN034004EN www.eaton.com
61
2.10 Actuator output
The actuator output (M12 connections) enables the control of external
signaling elements or relays.
To do this, pin 4 of the ASi connection must be supplied with an external
voltage of +24 V DC. The corresponding reference point is pin 2 (0V) on the
AS-i connector. The actuator (indicator lamp, relay, valve) can be connected
using Q3 pin 4 (+24 V, max. 1 A). Reference point (0V) is pin 3.
The actuator output is controlled internally; the response time is up to 20 ms.
The permitted length of the connection cable is 20 m.
Maximum load current
• The maximum permissible load current is 1 A with external power
supply.
• If there is no external power supply, the maximum permissible load
current is only 100 mA.
The actuator output is short-circuit proof.
In the event of an overload or short-circuit, a group fault signal will be
generated and the Motor LED will light up red to indicate this.
￫
Actuator output
An actuator output is only available in the form
RAMO5-xx
1 …-…S1.
RA-XAZ2-1M
AS-I Data
Fault
I1
SEN I1
ACT Q1
Q1
SEN I2
I2
PWR FLT
1 –
2 –
3 0 V Actuator output (Q1)
4 +24 V DC Actuator output (Q1)
5 –
1
3
2
4
5
24 V DC
1 (ASi+)
2 external 0 V
3 (ASi–)
4 external 24 V
2
4
1
3