Eaton PROFIBUS-DP EZ204-DP Скачать руководство пользователя страница 3

Страница: 3 / 212

For more information visit:

www.EatonElectrical.com

MN05013001E

Before commencing the installation

• Disconnect the power supply of the device.

• Ensure that devices cannot be accidentally

restarted.

• Verify isolation from the supply.

• Short circuit to earth.

• Cover or enclose neighboring units that

are live.

• Follow the engineering instructions (AWA)

of the device concerned.

• Only suitably qualified personnel in

accordance with EN 50110-1/-2 (VDE 0105

Part 100) may work on this device/system.

• Before installation and before touching

the device ensure that you are free of

electrostatic charge.

• The functional earth (FE) must be

connected to the protective earth (PE) or

to the potential equalization. The system

installer is responsible for implementing this

connection.

• Connecting cables and signal lines should

be installed so that inductive or capacitive

interference does not impair the automation

functions.

• Install automation devices and related

operating elements in such a way that they

are well protected against unintentional

operation.

• Suitable safety hardware and software

measures should be implemented for the

I/O interface so that a line or wire breakage

on the signal side does not result in

undefined states in the automation devices.

• Ensure a reliable electrical isolation of the

low voltage for the 24 volt supply. Only

use power supply units complying with

IEC 60364-4-41 (VDE 0100 Part 410) or HD

384.4.41 S2.

• Deviations of the mains voltage from the

rated value must not exceed the tolerance

limits given in the specifications, otherwise

this may cause malfunction and dangerous

operation.

Eaton Safety in

structio

Warning!

Dangerous electrical voltage!

Содержание PROFIBUS-DP EZ204-DP





















































































































































































































Результаты поиска

Содержание PROFIBUS-DP EZ204-DP

Отзывы:

Похожие инструкции для PROFIBUS-DP EZ204-DP

Бренды по названию

Популярные бренды

Eaton PROFIBUS-DP EZ204-DP, Руководство пользователя

Результаты поиска

Содержание PROFIBUS-DP EZ204-DP

Отзывы:

Похожие инструкции для PROFIBUS-DP EZ204-DP

Бренды по названию

Популярные бренды