Eaton PowerXL, Инструкция по установке и настройке параметров

Страница: 13 / 173

1 Device series DC1-S…
1.1 Introduction
DC1-S…20…, DC1-S…OE1 Variable Frequency Drives 05/21 MN040058EN www.eaton.com
9
1 Device series DC1-S…
1.1 Introduction
PowerXL
™
DC1-S… variable frequency drives are a special-purpose version
of the DC1 series that is specifically designed for controlling single-phase AC
motors (capacitor-start/capacitor-run motors, shaded-pole motors). Their
ease of use and reliability make them ideal for use in general applications
(pumps, fans, belt conveyors).
For installations in control panels, devices with an output range of 0.37
(with 115 V) to 1.1 kW (with 230 V) are available in a compact and sturdy
design in frame sizes FS1 and FS2 with a degree of protection of IP20.
For distributed local installations, there are two frame sizes covering an
output range of 0.37 (with 115 V) to 1.1 kW (with 230 V) and featuring a
degree of protection of IP66. These models come in two versions: with and
without local controls. These local controls include a setpoint potentiometer,
an operating mode selector switch for switching operating directions, and a
lockable main switch on the mains side.
The computer-based drivesConnect parameter configuration program
ensures data integrity and reduces the time required for commissioning and
maintenance.
In addition, the comprehensive accessories available increase the inverters’
flexibility in all scopes of application.
IP20 degree of
protection IP66 degree of protection IP66 degree of protection, with local
controls
Figure 1: Models and enclosure versions
L1/L L2/N L3
DC-
U
DC+ BR
V
W
1 2 3
4 5 6 7 8 9 10 11


PWR
OFF
ON
REV
FWD
0