![background image](http://html1.mh-extra.com/html/eaton/powerxl-dx-net-ethercat-2/powerxl-dx-net-ethercat-2_manual_524574023.webp)
3 Installation
3.4 Mounting for frame sizes FS2 and FS3
DX-NET-ETHERCAT-2
01/14 MN040009EN
www.eaton.com
19
3.4 Mounting for frame sizes FS2 and FS3
In the case of DA1 variable frequency drives with sizes FS2 and FS3, the
NET-ETHERCAT-2 fieldbus connection needs to be installed on the bottom of
the variable frequency drive. To do this, use a flat-blade screwdriver to lift off
the cover at the marked cutout (without forcing it) and then remove the cover
by hand.
Figure 8:
Opening the interface cover
After doing so, you can insert the connection and secure it with the two
screws.
Figure 9:
Inserting the fieldbus connection
NOTICE
Do not insert tools or other objects into the opened variable fre-
quency drive.
Ensure that foreign bodies do not enter the opened housing wall.
DC+ BR
U
V
W
1 2 3 4 5 6 7 8 9 10 11 12 13
14 15 16 17 18
COM
4 mm
RUN
ERR
T 8
0.25 Nm
(2.21 lb-in)
COM
Содержание PowerXL DX-NET-ETHERCAT-2
Страница 4: ...II ...
Страница 20: ...2 Engineering 2 2 LED indicators 16 DX NET ETHERCAT 2 01 14 MN040009EN www eaton com ...
Страница 28: ...3 Installation 3 7 Install field bus 24 DX NET ETHERCAT 2 01 14 MN040009EN www eaton com ...
Страница 54: ...4 Commissioning 4 12 CoE communication objects 50 DX NET ETHERCAT 2 01 14 MN040009EN www eaton com ...