![background image](http://html1.mh-extra.com/html/eaton/powerxl-dx-net-ethercat-2/powerxl-dx-net-ethercat-2_manual_524574015.webp)
1 Device series
1.6 Proper use
DX-NET-ETHERCAT-2
01/14 MN040009EN
www.eaton.com
11
1.6 Proper use
The DX-NET-ETHERCAT-2 fieldbus connection is an electrical piece of equip-
ment that can be used to control DA1 variable frequency drives and connect
them to a standard EtherCAT field bus system. It is intended to be installed
in a machine or assembled with other components into a machine or system.
It makes it possible for DA1 series variable frequency drives to be integrated
as slaves into EtherCAT field bus systems.
Figure 4:
How the DX-NET-ETHERCAT-2 fieldbus connection
can be integrated into a EtherCAT network
a
Head-end controller (master)
b
EtherCAT cable
c
Variable frequency drive DA1 with DX-NET-ETHERCAT-2 connection
d
Motor(s)
The EtherCAT cable coming from the master needs to be plugged into the IN
RJ45 socket. The outgoing connection from the DX-NET-ETHERCAT-2
module needs to be connected using the OUT socket.
Simply leave the OUT socket on the last device (variable frequency drive)
alone. A bus termination resistor is not necessary.
→
The DX-NET-ETHERCAT-2 fieldbus connection is not a house-
hold appliance, but rather a component intended exclusively for
use in commercial applications.
→
Observe the technical data and connection requirements
described in this manual.
Any other usage constitutes improper use.
③
①
②
④
L1/L L2/N L3
DC-
U
DC+ BR
1 2 3 4 5 6 7 8 9 1
0 11 12 13
14 15 16 17 18
COM
V
W
L1/L L2/N L3
DC-
U
DC+ BR
1 2 3 4 5 6 7 8 9 1
0 11 12 13
14 15 16 17 18
COM
V
W
Содержание PowerXL DX-NET-ETHERCAT-2
Страница 4: ...II ...
Страница 20: ...2 Engineering 2 2 LED indicators 16 DX NET ETHERCAT 2 01 14 MN040009EN www eaton com ...
Страница 28: ...3 Installation 3 7 Install field bus 24 DX NET ETHERCAT 2 01 14 MN040009EN www eaton com ...
Страница 54: ...4 Commissioning 4 12 CoE communication objects 50 DX NET ETHERCAT 2 01 14 MN040009EN www eaton com ...