manualshive.com logo in svg

Eaton PowerXL DX-NET-DEVICENET, Руководство пользователя

Поделиться
Скачать
Eaton PowerXL DX-NET-DEVICENET Скачать руководство пользователя страница 29

4 Commissioning

4.1 DA1 variable frequency drives

DX-NET-DEVICENET

02/14 MN04012005ZEN

www.eaton.com

25

4 Commissioning

4.1 DA1 variable frequency drives

4.2 EDS file

The properties of a DeviceNet module are described in what is referred to as 
an EDS file. In order to be able to connect a DA1 variable frequency drive to a 
DeviceNet network, you will need the corresponding EDS file.

4.3 Addressing

Each DeviceNet module requires its own unique address (MAC ID) within 
the DeviceNet network. A DeviceNet network can support up to 64 
addresses (0 to 63). To set DeviceNet addresses, you will need to use the 
configuration software for the master controller you are using (this may 
require the use of an explicit message). To do so, use the corresponding 
service from the DeviceNet object.

￫

First of all complete all measures for commissioning the DA1 
variable frequency drive as described in the respective manual 
MN04020005Z-DE.

￫

Check the settings and installations for the connection to the 
DeviceNet field bus system which are described in this manual.

NOTICE

Make sure that there is no danger in starting the motor.
Disconnect the driven machine if there is a danger in an 
incorrect operating state.

￫

For communications, parameter P12 (drive control) must be set 
as follows in the DA1 variable frequency drive:
P12 = 4, P5-01 = 0 - 63

For detailed information on how to configure parameters, please 
refer to manual MN04020005Z-EN.

￫

The EDS file can be found on the CD-ROM and on the Internet 
at:

www.eaton.com/moeller

 

￫

 

Downloads

￫

The MAC address will be printed on the corresponding 
nameplate. The DHCP function will be enabled by default.

Содержание PowerXL DX-NET-DEVICENET































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды