Eaton Power Xpert 9395P-600/600, Инструкция по установке и эксплуатации, Страница: 22 / 226

4 Eaton ® Power Xpert ® 9395P-600 (300V-600V) Installation and Operation Manual 164000710—Rev 07
11..22 S Siinnggllee U UP PM M P Plluuss 11 aanndd TTw woo U UP PM M P Plluuss 11 C Coonnffiigguurraattiioonnss
The optional Single UPM Plus 1 9395P-600 UPS configuration has three sections:
• an ISBM section configured either as an integrated system bypass module (ISBM) or an input output
module (IOM) rated for a maximum of 600 kVA
• a UPM section with one UPM
• one field-installed UPM (FI-UPM), which is field upgraded and provides N+1 redundancy for the basic
configuration
The optional Two UPM UPS 9395P-600 configuration has three sections:
• an ISBM section configured either as an integrated system bypass module (ISBM) or an input output
module (IOM) rated for a maximum of 900 kVA
• a UPM section with two UPMs l one field-installed UPM (FI-UPM), which is field upgraded and provides N
+1 redundancy for the basic configuration
For Plus 1 field upgrades to all models, the FI-UPM is shipped separately and is added later to the left of the
existing configuration (see
Figure 3 and Figure 4 ).
Figure 3. Standard Single UPM and Two UPM, Plus 1 FI-UPM UPS Configurations (all except the 600V
model)
FI-UPM
ISBM
UPM
UPM
ISBM
UPM
FI-UPM
Standard ISBM and 2 x UPM Section, Upgraded with
Plus 1 Field Installed FI-UPM
(380V, 400V, 415V, and 480V)
Standard ISBM and 1 x UPM Section, Upgraded with
Plus 1 Field Installed FI-UPM
(380V, 400V, 415V, and 480V)
Introduction