Eaton Power Xpert 9395P-600/600, Инструкция по установке и эксплуатации, Страница: 215 / 226

Eaton ® Power Xpert ® 9395P-600 (300V-600V) Installation and Operation Manual 164000710—Rev 07 197
88..88 S Suuppeerrvviissoorryy C Coonnttaacctt M Moodduullee IIII
An optional SCM II establishes an interface between the UPS system and the customer's monitor. This
interface allows the customer to monitor operational status of the UPS system equipment. The SCM II can be
flush–mounted or surface–mounted on a desktop, or secured to a wall.
Figure 126 shows the SCM II.
Figure 126. Supervisory Contact Module II
The SCM II provides signals for the indications shown in Table 47 .
Table 47. SCM II Status Indicators and Connections
Indication TB2 Connections
SYSTEM NORMAL TB2–1 through TB2–3
NO REDUNDANCY TB2–4 through TB2–6
ON GENERATOR TB2–7 through TB2–9
BYPASS NOT AVAILABLE TB2–10 through TB2–12
ON BATTERY TB2–13 through TB2–15
UPS ALARM TB2–16 through TB2–18
ON BYPASS TB2–19 through TB2–21
SHUTDOWN IMMINENT TB2–22 through TB2–24
Communication