Eaton Power Xpert 9395P-600/600, Инструкция по установке и эксплуатации, Страница: 99 / 226

Eaton ® Power Xpert ® 9395P-600 (300V-600V) Installation and Operation Manual 164000710—Rev 07 81
6. If installing a UPS configured as an Input Output Module (IOM), proceed to Step 8; otherwise, proceed to
Step 7.
7. Using hardware from the external wiring terminal hardware kit (see Table 21 ), connect phase A, B, and C
bypass input power wiring from the utility source to the bypass input terminals in the ISBM section. See
paragraph
3.2.6 UPS System Power Wiring Preparation for wiring and termination requirements.
8. If wiring a distributed bypass system, proceed to Step 9; otherwise, proceed to Step 11.
9. Using hardware from the external wiring terminal hardware kit (see ), connect phase A, B, and C wiring
from the output terminals of each UPS unit to the customer-supplied tie cabinet or load distribution panel.
See paragraph
3.2.6 UPS System Power Wiring Preparation for wiring and termination requirements.
10. Proceed to paragraph 4.8.3 Battery Power Wiring .
11. Using hardware from the external wiring terminal hardware kit (see Table 21 ), connect phase A, B, and C
power wiring from output terminals to the critical load. See paragraph
3.2.6 UPS System Power Wiring Preparation for wiring and termination requirements.
12. Proceed to paragraph 4.8.3 Battery Power Wiring .
Installation