Eaton Power Xpert 9395P-1100/1100, Инструкция по установке и эксплуатации, Страница: 159 / 214

Eaton ® Power Xpert ® 9395P-1200 Installation and Operation Manual 164000500—Rev 11 141
77..33..22 U Ussiinngg tthhee TToouucchh S Sccrreeeenn
The touch screen control panel provides an operator interface with the UPS system. Figure 82 identifies the
display areas discussed in the following sections.
Touching anywhere on the screen brings up the Sign In Request pop-up. Touch the X in the upper right corner
of the pop-up, then touch the padlock symbol in the upper right corner to obtain the password request pop-up
(see
Figure 83 ).
Figure 82. Parts of the Touch Screen
A
B
A The UPS status area automatically displays the Eaton model number, current time and date, active alarms, active notices, and
load percent and battery run time for the UPS. If the Eaton Environmental Monitoring Probe is installed, the temperature and
humidity sensed by the probe will also be displayed. The small head symbol between the system model and time allows the
operator select a different language from an imbedded list.
The top line of the display blinks while scrolling when the system needs attention. Some notices and alarms may be
accompanied by an audible horn. To silence the horn, touch anywhere on the control panel once. For more information about
alarms and notices, see paragraph
7.3.12 User Log .
B The information area contains data about UPS status and operations.
C After touching the padlock in the upper right corner, the numerical keypad appears to allow entry of the system access pass
code for operation. See
Table 36 . Security Levels and Functions.
UPS Operating Instructions