Eaton PDI WaveStar, Руководство по установке и эксплуатации

Страница: 48 / 68

38 Eaton PDI WaveStar Color Monitor Setup and Operation Manual P-164001109—Rev 01
5. Scroll within the circuit list on the first device screen to find circuit or other component in warning/alarm.
An alarm may apply to a circuit or to the entire device, such as "Under Current PB."
Figure 32. ALARM Screen with Alarm List
Alarm or Warning Name
“Over Volt Main” locates the
problem to the main voltage
source to the panelboard.
Device Name
BCMS KWH = device (generic panelboard
device with KWH points list).
Device Name should be changed from
generic name to user-specified name
on the device’s SETTINGS screen.
Touching SILENCE HORN silences the
Color Monitor’s audible alarm, which
sounds when an alarm is issued.
Touching CLEAR ALL clears all
outstanding warnings and alarms on
screen and resets corresponding Modbus
registers in the device points list. It takes
several seconds for alarms to clear.
If a warning/alarm condition remains
outstanding, the warning/alarm will
remain on the ALARM screen.
Alarms and Troubleshooting