Eaton PDI WaveStar, Руководство по установке и эксплуатации

Страница: 45 / 68

Eaton PDI WaveStar Color Monitor Setup and Operation Manual P-164001109—Rev 01 35
Figure 29. Readings: BCMS IEC Panelboard
Touch BCMS IEC device name in the device name list.
Device name turns blue when selected and device name displays in
header. (Device name can be changed in
SETTINGS
.)
Touch READINGS to see BCMS IEC panelboard power monitoring
data in three screens.
Panelboard Individual Circuits Instantaneous
Measurements:
NO = circuit number (scroll through 42 circuits)
AMPS = Amperes
KW = Kilowatts
KVA = kilovolt-amperes
KVAR = kilovolt-amperes reactive
PF = power factor
KWH
= Kilowatt Hours
Panelboard Circuits, Measurements and Alarms:
NO = Circuit Number
AMPS = Amperes
CB = Circuit breaker rating (Amps)
MIN = Lowest current read
MAX
= Highest current read
ZERO:
OK = Current has not dropped to 0 since last
reset; ACTIVE = Current has read 0 after having read
a minimum current
WARNING: OK = No warning outstanding; ACTIVE =
warning outstanding
ALARM: OK = No alarm outstanding; ACTIVE = Alarm
is outstanding
Panelboard totals, instantaneous measurements:
Voltage AB, BC, etc., to panelboard with THD (Total
Harmonic Distortion %) by phase:
Voltage source
Frequency
Panelboard totals instantaneous power
measurements by phases ABC and total:
KW
KVA
KVAR
PF
Panelboard cumulative reading:
KWH to panelboard as whole
Clear = Reset KWH to 0.
Device Chain: Readings