Eaton PDI WaveStar Infinity 2, Руководство по установке и эксплуатации

Страница: 27 / 78

Eaton PDI WaveStar Infinity 2 Monitoring System Setup and Operation Manual P-164001106—Rev 01 17
44..22..44 S Seennssoorr B Baassee B Booaarrddss aanndd O Oppttiioonn B Booaarrddss
Sensor Base Boards can attach up to (4) four Option Boards. Option boards provide great flexibility for
customizing Infinity monitoring configurations.
Figure 10. Sensor Base Board with Two Option Boards
Option Board
positions are
numbered 1-4.
The order of the
Option Boards is
re � lected in your
Sensors’ Status
screen, Modbus
Points List and
SNMP MIB.
In this example, the
Voltage
Option
Board (1) would be
listed ahead of the
Current
Option
Board (2).
Sensor
Base Board
Voltage
Option Board
Current
Option Board
Two Unused
Option Board
Positions
3 2
1
4
The only connections to Option Boards that customers usually make are to a Digital Inputs Option Board and a
Relay Option Board. Digital Inputs and Relays are typically the last boards listed in the sensor chain.
Customer Sensor Board Connections