Eaton PDI WaveStar Infinity 2, Руководство по установке и эксплуатации

Страница: 11 / 78

Eaton PDI WaveStar Infinity 2 Monitoring System Setup and Operation Manual P-164001106—Rev 01 1
C Chhaapptteerr 11 S Saaffeettyy
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed during installation and maintenance of the
Eaton PDI WaveStar Infinity 2 Monitoring System. Read all instructions before operating the equipment and
save this manual for future reference.
Please pay special attention to the use of “Danger” symbols throughout this manual indicating electrical or
other safety hazards. Following these safety instructions is extremely important to avoid possible injury or
death.
This symbol is used throughout this manual to indicate the presence of high voltages, representing a hazard for
electric shock, burn or explosion. Follow the instructions carefully to avoid serious or fatal injury.
Follow safe electrical work practices:
• Read, understand, and follow the instructions before installing this product.
• Ensure all power is disconnected before performing installation or service.
• Install equipment in an appropriate electrical environment per local regulations.
• PCBs are ESD sensitive equipment: Ground yourself, discharge any static charge and ensure that the
device is effectively grounded before handling the unit.
Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel and in
accordance with all local safety codes. Eaton assumes no responsibility for any consequences arising out of the
use of this manual.
This document should NOT be viewed as sufficient by otherwise non-qualified personnel to operate,
service, or maintain the equipment discussed.